Many Kansas cattle operations rely on some type of harvested feed to use in the winter months and common among those sources is forage sorghum, millets, sorghum-sudangrass, and sudan. Forages in the sorghum family are prone to two different problems for feeding cattle, nitrate poisoning and prussic acid (hydrocyanic acid, HCN) poisoning. Millet (proso and pearl) do not contain prussic acid but can have nitrates. Prussic acid and nitrate poisoning are easy to get confused because both result in a lack of oxygen availability to the animal and are more likely to occur when the plant is stressed (fertility, hail, drought).
Table 1. Key characteristics of nitrate and prussic acid poisoning.
Item |
Nitrate |
Prussic Acid |
Plant parts most affected |
Base of plant |
Young or new growth |
Types of plants |
Many, especially sorghum family, pigweed (palmer amaranth, redroot, waterhemp), kochia, oat hay |
Many (> 3,000 plant species), sorghums including Johnson grass, white clover, birdsfoot trefoil, Indiangrass, Cyndon spp. (Bermuda) |
Grazing problems |
Consumption of lower plant, rarely a problem unless extremely high levels or forced to eat entire stem |
Consumption of newest growth |
Hay |
Not impacted by drying |
Not impacted by drying |
Time of death |
Several hours after consumption |
Within minutes of consumption, treatment can rarely occur fast enough to save the animal |
Blood/Oxygen |
Chocolate brown colored blood, hemoglobin converted to methemoglobin and unable to carry oxygen |
Blood bright cherry red, hemoglobin contains oxygen, but not available to cells |
In dry areas of the state, cattle may be removed from pasture early. Bringing hungry cattle into pens with weeds can be very dangerous as the nitrate concentration may be elevated throughout the plant and animal intake high. Manure in corrals can contribute to the elevation of nitrates in the weeds. Elevated nitrates may not result in death but could cause abortions.
The current KSU forage fact sheet on prussic acid poisoning indicates that prussic acid potential dissipates as the forage dries. Additionally, hay or silage that likely contained high cyanide concentrations at harvest should be analyzed before it is fed. This second statement is often forgotten and it’s assumed that when the plant dries, all the cells are ruptured and any HCN is released. To confirm this, we measured dhurrin content in sorghum hay in a study last year. The dhurrin content was stable from 1 to 10 weeks of dry storage. In the plant, dhurrin (the precursor to HCN in sorghum species) and the enzyme that converts it to cyanide, are stored in separate compartments within the cell. When the plant is eaten, the compartments are ruptured, and the cyanide formed and released. Measurement of dhurrin directly is used in some research studies. However, commercial labs do not typically measure dhurrin directly. Rather the procedure includes something to stimulate cyanide release. If hay is made from forages in the sorghum family or other susceptible species, testing for prussic acid in forage that has suffered from drought, hail or fertility issues is advised. Testing is cheap compared to the cost of losing even one animal.
Management recommendations common to both prussic acid and nitrates
If testing before grazing, samples should reflect what the animals are expected to consume, generally leaves and upper portion of the plant. Sample a minimum of 15 sites across a given field. One method is to sample from each corner and the center by walking diagonal lines and sample plants every 50-100 steps or as appropriate for field size.
We expect levels of nitrates and prussic acid to be variable across a field, so more samples are better than less. A rule of thumb is to sample 10 to 20 % of the bales per field or cutting as a minimum. Be aware of areas of the field that exhibited more plant stress than others. If large enough areas, you may want to sample them separately. Your acreage size and feeding methods likely factor into this decision. Use a forage probe that cuts across all plant parts in a bale rather than a grab sample from individual bales or windrows. Most county extension offices can help with sampling procedures and equipment.
Prussic acid in sorghum following a freeze event
Frost causes plant cells to rupture and prussic acid gas forms in the process. Because the prussic acid is in a gaseous state, it will gradually dissipate as the frosted/frozen tissues dry. Thus, risks are highest when grazing frosted sorghums and sudangrasses that are still green. New growth of sorghum species following frost can be dangerously high in prussic acid due to its young stage of growth. Prussic acid content decreases dramatically during the hay drying process and during ensiling. It is recommended to wait ten days until after a killing freeze before grazing. Sorghum and sudangrass forage that has undergone silage fermentation is generally safe to feed.
For more complete information on these problems see these publications Nitrate Toxicity and Prussic Acid Poisoning. If you have samples with high prussic acid concentrations, and are willing to share information on variety, growth, fertility, and harvest conditions, it will be helpful as we strive to better understand this issue.
Sandy Johnson, Extension Beef Specialist, Northwest Research-Extension Center
sandyj@ksu.edu
John Holman, Cropping Systems Agronomist, Southwest Research-Extension Center
jholman@ksu.edu
Augustine Obour, Soil Scientist, Agricultural Research Center - Hays
aobour@ksu.edu
Tags: grazing sorghum forage prussic acid nitrate toxicity sudan millet