Too often producers do not notice mustard weeds in their wheat fields until the mustards start to bloom in the spring. As a result, producers often do not think about control until that time. Although it is still possible to get some control at that time with herbicides, mustards are much more difficult to control at that stage and often have already reduced wheat yields by then.
To minimize yield losses, mustards should be controlled by late winter or very early spring, before the stems begin to elongate (bolt; Figure 1). If mustards are present in the fall, they can be controlled with ALS-inhibiting herbicides such as Ally, Amber, Finesse, Affinity, Rave, Olympus, or PowerFlex. Huskie, Talinor, Quelex, 2,4-D, and MCPA can also provide good control of most mustards if the weeds are at the right stage of growth and actively growing, and if the wheat is at the correct growth stage. However, wheat should be fully tillered before applying 2,4-D or tillering will be inhibited. Dicamba and Starane are not very effective for mustard control.
In the late winter or early spring, blue mustard is perhaps the most difficult of the winter annual broadleaf weeds to control because it bolts very early. To be effective on blue mustard, herbicides typically need to be applied in late February or early March. Blue mustard is more difficult to control than tansy mustard with 2,4-D because blue mustard has often already bolted by the time 2,4-D can be safely applied to wheat. Thus, 2,4-D often is applied too late to be effective on blue mustard.
Figure 1. Effect of timing of blue mustard control in wheat: K-State research, 2014. Photos by Dallas Peterson, K-State Research and Extension.
Flixweed and tansy mustard should be treated when they are no larger than two to three inches across and two to three inches tall. As these plants become larger, the control decreases dramatically. Ester formulations of 2,4-D and MCPA are more effective on tansy mustard and flixweed than amine formulations. Field pennycress is easier to control than tansy mustard or flixweed. Herbicide applications made before the pennycress bolts are usually effective.
Most ALS-inhibiting herbicides control winter annual mustards very well, although there are populations of bushy wall flower (treacle mustard) and flixweed in Kansas that are ALS-resistant and cannot be controlled by these products. Alternative measures will be needed to control these populations. The best approach to control ALS-resistant broadleaf weeds is to use other herbicides or tank-mixes with 2,4-D, MCPA, Huskie, or Talinor. None of these herbicides have much residual control, so the majority of weeds need to be emerged and actively growing at the time of treatment.
Some producers commonly apply ALS herbicides with fertilizer in January or February. Unfortunately, MCPA, 2,4-D, and Huskie are most effective when applied to actively growing weeds, so application when weeds are dormant may not provide good control. As a result, if an ALS-inhibitor tank-mix with one of these herbicides is applied to dormant ALS-resistant mustards in the winter, poor control could occur.
Crop rotation with corn, grain sorghum, soybeans, cotton, or sunflowers is a good way of managing mustards as long as they are controlled in the spring prior to producing seed. Crop rotation will usually result in a gradual reduction of mustard populations in the future as the seedbank in the soil decreases.
Sarah Lancaster, Weed Management Specialist
Tags: mustards wheat weed control