Cut-off dates approaching for XtendiMax, Engenia, and Tavium applications

Share Tweet Email

Farmers planning to apply XtendiMax, Engenia, or Tavium to their dicamba-resistant soybean have about two weeks remaining to make those herbicide applications. These are the only dicamba-containing products labeled for over-the-top use in dicamba-resistant soybean and cotton.  One of the requirements added to these labels in 2021 was a cut-off date for applications. The last day these products can legally be applied to soybean is June 30. The cut-off date for cotton is July 30.


For those making over-the-top applications of dicamba in the coming days, remember the restrictions listed below are included on the labels to reduce off-target movement.

  • It can only be applied by certified applicators with dicamba-specific training.
  • Spray records must be created within 72 hours of application and kept for 2 years.
  • Only approved tank-mix partners listed on the company website can be used.
  • An approved volatility reduction agent and an approved drift reduction agent must be included in the tank mix.
  • Only approved nozzles listed on the company website can be used.
  • Maximum boom height is 24 inches.
  • Maximum ground speed is 15 miles per hour.
  • Only apply when wind speeds at boom height are 3 to 10 miles per hour.
  • Do not apply if a run-off-producing rain event is forecast in the next 48 hours.
  • Do not apply if sensitive crops are downwind.
  • Maintain a 240-foot downwind buffer.
  • The Bulletins Live Two website must be consulted to ensure no endangered species will be affected by the application.
     


For more detailed information, see the “2023 Chemical Weed Control for Field Crops, Pastures, and Noncropland” guide available online at https://www.bookstore.ksre.ksu.edu/pubs/CHEMWEEDGUIDE.pdf or check with your local K-State Research and Extension office for a paper copy.

The use of trade names is for clarity to readers and does not imply endorsement of a particular product, nor does exclusion imply non-approval. Always consult the herbicide label for the most current use requirements.

 

Sarah Lancaster, Weed Science Extension Specialist
slancaster@ksu.edu


Tags:  dicamba label requirements EPA application timing